Home > Products > Aupart Adjustable Panhard Rods

Aupart Adjustable Panhard Rods  

An absolute necessity on all raised 4WD's is the Adjustable Panhard Rod. Designed to correct axle alignment, the fitment of an Adjustable Panhard Rod eliminates potential contact between tyre and body, and improves handling issues on vehicles on vehicles lifted 2"+. All Aupart Adjustable Panhard Rods are Heavy Duty, single thread off car adjustable and come complete with bushings and steering damper mounting brackets where applicable. The majority of Aupart Adjustable Panhard Rods now come standard with high flex Rubber Bushings. This has been a gradual change based on customer demand. Our Aupart rubber bushings bring the factory ride feel to the upgraded replacement Adjustable Panhard Rods. The high flex Aupart rubber bushings offer less Noise, Vibration & Harshness over the polyurethane bushings for panhard applications.

RUBBER BUSHED OPTIONS 

Part NumberApplicationLocationBushingOD (mm)Wall Thickness
NISSAN
AT0526R NISSAN PATROL GQ-GU1-with front coils FRONT KB06 / KB45 30 SOLID
AT0527R NISSAN PATROL GQ-GU1-with rear coils REAR KB06 / KB45 30 SOLID
AT0549 NISSAN PATROL GU2-on inc. SWIVEL BUSHING RUBBER FRONT KB06 33 SOLID
AT0550 NISSAN PATROL GU2-on inc. SWIVEL BUSHING RUBBER REAR KB06 33 SOLID
TOYOTA
AT0535R TOYOTA LANDCRUISER 80-105 SERIES-with solid axle FRONT KB117 30 SOLID
AT0536R TOYOTA LANDCRUISER 80-105 SERIES-with solid axle REAR KB118 30 SOLID
AT0850 TOYOTA LANDCRUISER 76/78/79 SERIES V8 FRONT KB116 33 SOLID
AT0856 TOYOTA HILUX 130 SERIES URETHANE BUSHED ONLY REAR URETHANE 27 SOLID
AT0874 TOYOTA LANDCRUISER 78/79 SERIES 6Cyl FRONT KB116 35 SOLID
AT0912 TOYOTA LANDCRUISER 100 SERIES IFS URETHANE BUSHED ONLY REAR URETHANE 30 SOLID
AT0960 TOYOTA LANDCRUISER FJ (GJS12) / PRADO120 SERIES / HILUX 4RUNNER (4th & 5th Gen) REAR KB187 34 SOLID
AT0961 TOYOTA LANDCRUISER 200 SERIES REAR KB170 33 SOLID
OTHER
AT0551 JEEP CHEROKEE XJ, GRAND CHEROKEE ZJ, WRANGLER TJ FRONT KB18 26 SOLID
AT0868 JEEP WRANGLER JK FRONT KB128 26 SOLID
AT0869 JEEP WRANGLER JK REAR KB128 26 SOLID
At 30-33mm OD solid for the Patrol & Cruiser, Aupart Panhard Rods are much heavier duty than factory original.


Through a design change, Aupart Rubber and Urethane bushings are now the same dimensions as factory original, so all rods are manufactured to factory bush specifications. Bushing replacement if required is easy - just use factory original or aftermarket.

Design changes over time have seen the implementation of double nuts for extra security, 150mm of adjustment to suit for 2-6” lifts and fine 2.0mm pitch thread for finer adjustability.

Aupart 4WDs Adjustable Panhard Rods are one of the few on the market that are manufactured from Solid Bar, as well as boasting an increase in the Outside Diameter. It’s only a matter of time for any vehicle that is used for serious off-road work that the factory Panhard will break/bend. This will cause the body of the vehicle to move uncontrolled off centre to the chassis, damaging fuel filler lines, steering linkages, and more!